The priority of management factors for reducing the yield gap of summer maize in the north of Huang-Huai-Hai region,China

Understanding yield potential, yield gap and the priority of management factors for reducing the yield gap in current intensive maize production is essential for meeting future food demand with the limited resources. In this study, we conducted field experiments using different planting modes, which were basic productivity(CK), farmer practice(FP), high yield and high efficiency(HH), and super high yield(SH), to estimate the yield gap. Different factorial experiments(fertilizer, planting density, hybrids, and irrigation) were also conducted to evaluate the priority of individual management factors for reducing the yield gap between the different planting modes. We found significant differences between the maize yields of different planting modes. The treatments of CK, FP, HH, and SH achieved 54.26, 58.76, 65.77, and 71.99% of the yield potential, respectively. The yield gaps between three pairs: CK and FP, FP and HH, and HH and SH, were 0.76, 1.23 and 0.85 t ha~(–1), respectively. By further analyzing the priority of management factors for reducing the yield gap between FP and HH, as well as HH and SH, we found that the priorities of the management factors(contribution rates) were plant density(13.29%)fertilizer(11.95%)hybrids(8.19%)irrigation(4%) for FP to HH, and hybrids(8.94%)plant density(4.84%)fertilizer(1.91%) for HH to SH. Therefore, increasing the planting density of FP was the key factor for decreasing the yield gap between FP and HH, while choosing hybrids with density and lodging tolerance was the key factor for decreasing the yield gap between HH and SH.     

基于有限元的汽车扭臂热锻工艺研究

文章以汽车扭杆力臂为研究对象,通过DEFORM-3D有限元分析对汽车扭杆力臂热锻工艺过程进行模拟试验,分析了成形过程中的上模载荷情况、应力应变场分布情况和温度场的变化规律。以提高产品质量和降低载荷为主要目的,给出合理的热加工参数,分析结果能为类似锻件的热模锻工艺和模具设计提供依据。     

茶园节能型开沟刀设计与试验

针对茶园机械化开沟减阻减耗需要,设计茶园节能型开沟刀,用于减小茶园开沟时的开沟功耗。通过理论分析确定节能型开沟刀侧切刃与正切刃曲线方程,通过离散元仿真方法确定侧切刃螺旋线终点处滑切角与正切刃在侧切刃平面内展开曲线终点处静态滑切角分别为62°、56°。对设计完成的节能型开沟刀进行田间试验,试验结果表明:在开沟深度为15、20、25 cm时,节能型开沟刀的开沟功耗分别为0.093、0.107、0.128 kW,均小于对照组通用开沟刀的开沟功耗,说明设计的节能型开沟刀在各个开沟深度均能够达到降低开沟功耗的目的。此外节能型开沟刀在不同开沟深度的沟深稳定性系数均大于90%,高于国家标准和对照组通用开沟刀试验结果,说明设计的节能型开沟刀在降低作业功耗的同时,可保证开沟质量。     

筇竹种子发芽条件及筇竹笋矿质元素分析

筇竹为珍稀笋材两用混生竹,具有较高的经济价值。本研究对筇竹种子进行不同温度和光照条件的萌发实验,并培育实生苗发笋后,利用空气-乙炔火焰原子吸收光谱法测定了3个不同出土高度(2 cm,5 cm,8 cm)的筇竹笋中8种矿质元素的含量。实验结果显示,最适宜筇竹种子萌发的条件是20℃,12 h光照/12 h黑暗,但25℃和暗处理更能促进胚根伸长。不同生长时期的筇竹笋钾含量丰富(6521.13~7405.24 mg·kg-1),其次是钠(625.56~814.83 mg·kg-1),铜含量最低(6.86~9.62 mg·kg-1)。筇竹笋的钾、钠含量随高度的增高逐渐下降,而钙、铁、铜、锰含量逐渐升高,锌含量变化呈中峰优势,镁含量基本保持不变。研究为筇竹种子萌发及笋品质提升提供了参考。     

不同种植密度对机采辣椒品种性状和产量的影响

为明确不同种植密度对机采辣椒品种性状、产量的影响,以适宜机采的辣椒‘辣研102’为研究对象,设置4个种植密度（P0:38 480株/hm²、P1:51 307株/hm²、P2:76 961株/hm²、P3:102 615株/hm²）,分别于贵阳、遵义两地开展田间小区试验。结果表明,随着种植密度的增加,辣椒株高呈增加趋势,茎粗呈下降趋势。辣椒根部、地上部生物量均在高密植条件下（P3）时达到最小。辣椒的发病率与病情指数均随种植密度的增加而显著提高,高密植处理条件下（P3）达到最大,发病率分别为41.67%（贵阳）、43.33%（遵义）,病情指数分别为31.05%（贵阳）、29.86%（遵义）。过高的种植密度导致单株辣椒光合作用大幅下降:P1、P2、P3处理条件下光合速率分别较P0处理显著降低13.94%、24.73%、29.66%（遵义）;P1、P2、P3处理条件下辣椒叶片蒸腾速率较P0降低10.02%、19.81%、42.12%（贵阳）。辣椒总产量随种植密度增加而显著提高,而商品果产量随种植密度的增加呈先增加后降低的趋势。商品果产量在P1条件下获得最大值,相对于P0、P2、P3贵阳辣椒商品果产量显著提高了16.43%、32.81%、41.67%,遵义提高了20.25%、26.67%、61.02%。综合辣椒生长与商品果产量,贵州机采辣椒‘辣研102’最佳种植密度为51307株/hm²。     

Decreasing detection frequency of MITE(MCLas-A) in the population of ‘Candidatus Liberibacter asiaticus' recently collected in southern China

An active miniature inverted-repeat transposable element(MITE), MCLas-A, was previously identified from ‘Candidatus Liberibacter asiaticus' known to be associated with citrus Huanglongbing(HLB, yellow shoot disease). To explore the recent transposition status of MCLas-A, 389 ‘Ca. L. asiaticus' strains collected from nine regions in China were amplified using a specific primer set and three representative ‘Ca. L. asiaticus' strains were analyzed by next-generation sequencing(NGS) approach. PCR and genomic analysis showed that the entire MCLas-A was only present in 1.80%(7/389) and the jumping-out type of the MITE was predominant(81.23%) in samples tested, suggesting high frequency transposition occurred in ‘Ca. L. asiaticus' strains recently collected from China. Biological roles of transposition of the active MITE remain to be determined.     

水稻稀播条件下不同秧龄壮秧技术

以南粳9108为试验材料,研究稀播条件下(18000苗/m₂)不同措施对30、35 d秧龄秧苗素质的影响。结果表明:在18000苗/m₂的播种密度下,多效唑浸种能够有效地促进根系生长,矮化秧苗高度,显著提高秧苗素质,对于培育不同秧龄的壮苗均有促进作用。多效唑浸种浓度在0.5 g/L左右最为适宜。     

槐叶萍生物体微量元素含量特征研究

为了解京杭运河台儿庄段槐叶萍生物体中微量元素的含量特征,运用非色散原子荧光光度计和火焰原子吸收分光光度计测定了槐叶萍生物体不同部位中微量元素的含量。结果显示:Fe、Mn、Zn、Ni、Cu、Se 6种微量元素在槐叶萍花芽、叶、根与茎中含量差异极显著(P≤0.01),其中槐叶萍中微量元素Fe含量最高,Se的含量最低;与同科植物体比较,京杭运河台儿庄段槐叶萍生物体中微量元素Fe、Mn含量处于中等水平,Zn、Cu含量处于下游水平。     

不同行距配比对玉米光合生理指标及茎秆特性的影响

以‘大丰30’为试验材料,在同一密度下（75000株/hm²）设置5种不同行距配比,研究不同行距配比对玉米光合生理指标及茎秆力学特性的影响。结果表明：行距配比为40 cm×80 cm时,棒三叶的叶绿素含量(SPAD)在灌浆期达到峰值;行距配比为30 cm×90 cm时,棒三叶净光合速率在灌浆期最高。大口期开始,行距配比为40 cm×80 cm时,叶面积指数(LAI)最高。单株干物质积累量以40 cm×80 cm最高。各行距配比的茎秆硬皮穿刺强度与茎秆弯曲性能随着节位的下降均呈逐渐增强的趋势,从大到小为 40 cm×80 cm>50 cm×70 cm>30 cm×90 cm>60 cm×60 cm>20 cm×100 cm。穗长、穗粗、千粒重和穗粒数各处理间均有不同变化,行距配比为40 cm×80 cm时产量最高,比等行距60 cm×60 cm增产7.96%。由此可见,行距配比为40 cm×80 cm,有利于大穗型品种‘大丰30’的光合性能和茎秆强度的提高,从而达到抗倒伏增产的目的。     

不同种植密度对3个小豆品种植株形态及产量的影响

采用两因素随机区组设计,以直立型小豆品种冀红20、冀红21和唐红201602为材料,分析6个种植密度对不同小豆品种植株形态特征及产量性状的影响。结果表明,品种和种植密度对小豆形态特征和产量性状的影响较大;底荚高度和第一节间长随着密度的增加而增加,主茎节数、主茎分枝数、单株结荚数、单荚粒数和百粒重随着种植密度的增加而减小,产量随种植密度的增加呈先增加后减少趋势;相同品种不同种植密度间和相同种植密度不同品种间的产量差异极显著（F值分别为49.36、99.35）,品种与种植密度互作对产量的影响差异显著（F=3.91）。种植密度与株高、底荚高度呈极显著正相关,与第一节间长呈正相关,与茎粗、主茎分枝数和主茎节数呈极显著负相关。增加种植密度可增加小豆株高、底荚高度和第一节间长,有效减少主茎分枝数,有利于机械化收获。